Printers and Parts (Surplus)


Welcome to Surplus And Prts

DYMO LABELWRITER 400 93089 Thermal Label Printer USB

$95.99

DYMO LABELWRITER 400 93089 Thermal Label Printer USB 2.0

• Condition: Excellent - Used
• Includes  No Label/paper
• Content: One Printer with Power cord, power supply and USB AtoB Cable only No Labels

COLOR: LT BLUE WITH GRAY TRIM AND A TINTED BLUE COVER HAS SOME WARE AND LIGHT SCRATCHES.
LABLE PAPER IS NOT INCLUDED

The LabelWriter 400 printer is high-performance, low-cost printers used for printing mailing labels, postage, file folder labels bar code labels, and more. The printers have a 57 mm wide, 300-dpi print head and a 63 mm wide paper path. The LabelWriter Twin Turbo printer has two side-by-side label printing mechanisms in a single printer.  The 57 mm wide thermal print head uses 672 individually addressable dots to form individualraster lines of data at 300 dpi. Because they use specially treated, heat-activated paper, the
printers require no ink, toner, or other refills.
connect to a host computer through a standard full-speed USB 2.0-compatible interface. When used as raster-only printer

The print head prints the image onto the label by heating a row of resistive elements; this blackens the thermally sensitive label material. These 672 resistive elements are .085 mm square and are spaced at 300 per inch on the print head. To print a line, the control electronics load the desired data into a serial shift register. This shift register has one register for each print element. A "1" in a register causes the corresponding dot to be printed; a "0" leaves the dot blank.
The darkness or density of the image depends upon the amount of heat applied to the label material. The heat depends upon both the temperature of the print head and the amount of energy applied to the resistive elements. The energy applied to the resistive elements depends upon the voltage applied and the length of time that the voltage is applied. In order to maintain aconstant density, the control electronics measure the print voltage and the head temperature before each print cycle, and then calculate the required print strobe time.

Manual
Download Driver

AC ADAPTER
Input 100V-240VAc 50-60Hz,
output 12VDC 2.5A 60W
DC jack, 5.5 mm O.D. x 2.5 mm I.D. Center Positive

Dimensions: 7.2 x 4.2 x 5.2 inches approx
Width: 4.2"
Depth: 7.2"
Height:5.2"
Weight: 620 Grams

Special Note :
Some times Part no.  Model no. or serial no. may or may not same but product will be compatible. 
PleaseNote Original Does require separate AC power Cord for USA & Canada only.
It's important to buy the correct power Supply for your device. No Matter you're replacing a defective or lost power supply or simply purchasing one to go with a product that needs power.


Copyright © 2011 
All rights reserved


Add to Cart:

  • Model: 400 93089
  • Shipping Weight: 3lbs
  • 1 Units in Stock


This product was added to our catalog on Thursday 10 February, 2011.

Your IP Address is: 54.221.93.187
Copyright © 2017 xprinterparts.com. Powered by Zen Cart
100s of 1000s of items for sale online at click of your Mouse